LIQUID PARAFFIN

Buy Paraffin Solution in Toluene and Ethyl Acetate to improve the finish of your products in resin and gelcoat.

• The Paraffin Solution, with a maximum quantity of 4%, deposits on the surface, isolating the resin and gelcoat from the air and ensuring complete sandability in just a few hours.
• It is recommended to use the Paraffin Solution only in the final layer, as the treated products do not allow the adhesion of additional layers if not sanded.

Instructions for use

• Add the Paraffin Solution to the resin or gelcoat before or after the addition of the catalyst, only in the final layer.
• The recommended dosage is 4% of the weight of the resin.
• The typical dosage is 3-4%.

Technical specifications

• Flammability: below 23°C
• Density at 25°C: 0.87 g/cm3
• Paraffin content: 8%
• Storage: store at temperatures between 5 and 35°C and away from moisture.

Safe use advice

• Wear gloves and a mask with suitable filter during the mixture.
• Do not disperse the residues into the environment.
• Dispose of the product at an authorized reclaimer.
• For more safety information, carefully consult the component safety data sheet.