AMBRO-SOL PLASTIC PRIMER SPRAY 400 ML

The HQ plastic anchoring primer by Ambro-Sol is a clear base coat to apply before painting, designed to make spray enamels adhere to difficult plastic surfaces. It works as an adhesion promoter for paints on ABS, methacrylate, rigid PVC, polypropylene and polycarbonate. It can also be used as an anchoring base for painting plastic models and 3D printed objects, after a test on a hidden area.

Key features

• Adhesion promoter for spray enamels on difficult plastics

• Suitable for ABS, methacrylate, rigid PVC, polypropylene and polycarbonate

• Clear: does not change the colour of the surface

• 80 gloss finish (gloss meter at 60°)

• Operating temperature from -10 °C to +80 °C

• Patented child-proof safety cap

Technical specifications

• Content: 400 ml spray can

• Colour: clear

• Chemical nature: synthetic

• Relative density at 20 °C: 0.76 - 0.78 g/ml

• Pressure: 5.5 ± 0.5 bar at 20 °C; 8.0 ± 0.5 bar at 50 °C

• Dust free: 15-30 minutes (at 20 °C)

• Touch dry: 15-30 minutes (at 20 °C)

• Fully dry: 22 hours (at 20 °C)

• Recoating interval: 24/48 hours

• Application temperature: from 5 °C to 35 °C

• VOC limit value: 840 g/litre

How to use

• Shake the can vigorously for at least 1 minute, until you can feel the internal balls moving freely, and shake it from time to time during use as well

• Clean the surface carefully before application

• Always test on a hidden area to check compatibility with the surface to be painted

• Apply at room temperature, between 5 °C and 35 °C

Extremely flammable product. Read the safety data sheet before use.