SLIP CAST MOLD - EGG

Plaster mould in an egg shape designed for producing hollow ceramic objects, suitable for both casting techniques (slip, liquid clay or SlipFast) and press moulding with plastic clay. Ideal for batch production of decorative items, it is particularly suited for creating Easter eggs. Available in multiple sizes: smaller formats allow the production of 2 eggs per cycle, while larger sizes feature a single cavity.

Key features

• Plaster mould for egg-shaped objects
• Suitable for hollow forms
• Compatible with casting and press moulding
• Ideal for batch production
• Perfect for decorative and Easter eggs
• 2 cavities in small sizes, 1 in larger sizes

Technical specifications

• Material: special casting plaster
• Shape: egg
• Compatible techniques: casting and pressing
• Variants: multiple sizes available
• Cavities: 2 (small sizes) / 1 (large sizes)

Instructions for use

Casting (slip / Slipfast)

• Dilute with water to reach the desired viscosity.
• Pour into the mould up to the brim and top up as needed.
• Leave for 10–30 minutes depending on thickness.
• Empty excess liquid (reusable after filtering) and allow to drain.
• Open the mould and remove the still workable piece.
• Dry for 12–24 hours, then fire or decorate.

Press moulding (plastic clay)

• Use clay with a firm, plastic consistency.
• Press clay into the mould evenly by hand.
• Compact thoroughly, avoiding air pockets.
• Trim excess material and level edges.
• Let rest briefly to aid release.
• Open mould and remove the piece while still workable.
• Allow to dry completely before finishing and firing.